Regular readers may remember the sewing machine cover I started in July when I was in Sisters OR with my quilt group. My intention was to make a cover for the Janome 6500 that spends most of its time in my sewing room. I have a smaller Janome for classes but the big one goes with me on extended trips.

My Janome 6500 was with me in Sisters when I took its measurements and made the block for the front. Weeks later, when I was ready to work on the cover again, I realized the measurements I had taken in Sisters, while accurate, were wrong for this project. My sewing table features a drop-in ledge for the sewing machine so that the bed of the machine is flush with the table top. My sewing machine sits a full 3″ below the surface of the table, something my original measurements didn’t take into account. Oops.

The block I had already made couldn’t be cut down so I decided to finish the sewing machine cover and use it for traveling, and then make a new one that would stay in my sewing room.

That’s what I’ve been experimenting with. I decided to make a really simple cover without batting or quilting — and without a pattern. I just followed the lines of the vinyl cover that came with my Janome 6500. Rather than making a test version in muslin, I chose to use a beautiful cotton print. My rationale was that if I made the cover in muslin and it turned out well, all I would have was a plain muslin cover. If I made it in a pretty fabric and it didn’t turn out well, I could cut it apart and save the scraps for another project.

But it did turn out well! Take a look:

The main fabric is from the Garden Medley line by Susie Johnson for RJR and the binding fabric is a lime green Kona Bay blender. Here’s a slightly different view:

The fabric on the inside is a soft striped batik from my stash:

I interfaced the inside fabric to give the dust cover extra body. Instead of finishing the binding by hand, I fused it with 1/4″-wide Steam-a-Seam 2.

Now my mind is racing with ideas on refining the design. I don’t really need another sewing machine dust cover but I’d love to make one in different fabrics — I already know which ones — incorporating some patchwork and/or applique. I’d also like to try piping on the top and side edges and double-fold bias tape around the bottom edge.

I probably won’t get to it right away but – you never know. Sounds like a good rainy day project to me.