The simple tailored valances I made for my sister Diane’s garage are in place:

They were put up with spring tension rods because we knew the white trim around the windows would offer a crisp contrast with the blue floral valance fabric. (And you already know how I love blue and white.)

Here’s a close-up of one window:

Diane is horrified that I’m posting these pictures before she spackled the holes from the old curtain rod and touched up the paint. I assured her my readers would use their imaginations and pretend not to see them.

She loves the new valances, in no small part because of what she calls the “happy fabric.” We are definitely on the same page in that regard.

We both loved the valances I made last year:

It sure is a shame the ruffles got all floppy from the humidity (described in my last post).

Perhaps you are wondering what’s going to happen to those valances. Let me reassure you they will be repurposed in some fashion. The fabric really is beautiful:

I’ve already cut off the ruffled tops and rod pockets, leaving two rectangles measuring roughly 16″ x 66″. There’s enough there to make a couple of beautiful pillows or some other home dec or crafty item. If you have any suggestions, feel free to direct them my way.

And for those of you who saw my pictures from a year ago and thought Diane and Ed’s garage looked pristine and unused, here’s proof that they actually park their cars in it:

I hope those of you who celebrate American Thanksgiving had a delicious repast yesterday. We sure did, and now we get to enjoy the next best thing:  leftovers!

No, that’s not a typo. I’m in the valance-making business again! Just a few weeks after finishing valances for my stepmother’s living room windows, I’m here in Georgia at my twin sister’s home making valances for her garage windows.

But wait, you must be thinking. Didn’t I make valances for Diane’s garage windows last year at this time? Yes, I did. Alas, our noble effort (captured in this post) did not stand the test of time. We think the humidity in Georgia caused the ruffles at the top of the softly gathered valances, made out of a linen-like decorator fabric, to flop over. Most unseemly! Diane coped by tucking the ruffle out of sight behind the valances, which was definitely not the look either one of us was going for.

Chatting several months ago about what our options were for replacements, Diane mentioned how much she loved the valances I had made for my own kitchen windows:

She was wild about the fabric (from the “A Breath of Avignon” line by Sandy Klop for Moda) but I was sure I didn’t have enough left to make more valances. So that was that.

Then, while surveying my stash last week to see what project of my own I might work on during the Dear Husband’s and my annual two-week visit in November, I spotted another piece of that very fabric. I tossed it into my suitcase, and Diane was beyond delighted to learn there was enough for valances.

So . . . I brought a project for me (more on that later) and a project for her. What’s with the projects? Well, my sister and our husbands like to watch college football. It’s definitely not my thing so I am perfectly content to be working away on a sewing project in the kitchen dining area while the three of them are ensconced in the living room watching grown men hurtling themselves at each other in the pursuit of making or preventing touchdowns.

Diane really liked the design of my tailored kitchen valances, which feature a flange of yellow fabric just under the rod pocket:We didn’t have suitable fabric at her house so she ordered a spool of ⅝” grosgrain ribbon in a bright yellow gold to take the place of a flange. We had a good laugh when the ribbon arrived:

Diane thought she had ordered 10 yards. Turns out she ordered 100 yards — roughly the length of a football field!

I got started by making a rough sketch of the valance . . .

. . . followed by a freezer paper pattern:

In this next photo the grosgrain ribbon is ready to be stitched to the first valance:

It will be lined with blackout fabric, a necessity to keep the valance fabric from fading from light hitting it from the outside.

As home dec projects go, this is a simple one. Please stop by again soon to see the result!

Here’s a sneak peek of one of three valances I made for my stepmother Shirley’s living room windows:

You’re looking at a little over half of the shortest valance, which measures 62″ wide. The finished width is actually 54″ because the rod has brackets that come out from the wall 4″ on each end and the valance wraps around the brackets. The pleat near the end is close to where the valance wraps around the bracket.

I’m looking pretty pleased, aren’t I? The valances turned out just as I had envisioned them: understated and elegant. The simple design — flat valances with inverted pleats at the center and ends — allows the subtle herringbone decorator fabric to be the star of the show.

So about those best laid plans . . . The idea was to head over to Bend in Central Oregon this coming weekend to install the valances with the help of my nephew Scott, coming to Bend from another part of the state. We’ve all been keeping our eyes on the weather forecast, knowing this may be one of the last weekends to travel across the state before ice and snow make driving conditions dangerous.

The forecast is still looking good but I’m not going anywhere. Why? Because the Dear Husband has a rebound case of Covid! You may recall from my last post that he got Covid from me and was prescribed the antiviral medication Paxlovid, which helped him bounce back from Covid almost immediately. Four days after testing negative, he started exhibiting cold symptoms again and subsequently tested positive. It turns out about four percent of Covid patients who take Paxlovid come down with Covid again within a very few days. It’s known as “Paxlovid rebound.”

So here we are . . . back in isolation. Not going to Bend this weekend. If by some stroke of luck the weather the following weekend looks decent, and provided the DH is recovered (which I expect to be the case), we’ll make the trip over the mountain. If not, we’ll all have to wait till spring to see the valances installed in Shirley’s home.

The valances were more challenging to make than I expected. I quickly realized that the decorator fabric was quite thick and heavy, which would make traditional inverted pleats bulky, especially because the fabric needed to be lined. So I made faux pleats!

Let me show you what I mean. Here’s a picture of a pleat at one end of the valance:

Here’s what that pleat really looks like:

Do you see what I did? Each “pleat” is actually a separate piece of fabric lined to the edge, layered underneath the main fabric pieces, and attached to the rod pocket. (The lining fabric is a 100% quilting cotton from my stash.) Each valance is made of seven lined rectangles, three of which are faux pleats, plus the rod pocket.

Isn’t it nice when a home dec vision is realized?